High Security Hardware
Showing all 7 results
-
MSB62-10 MkII – Lock Monitoring Box
The Lock Monitoring Box is designed to monitor lock and door status
MSB62-10 MKII – Lock Monitoring Box
The original & the best. The 1st SCEC endorsed lock monitoring box.
The Lock Monitoring Box is designed to monitor lock and door status that can be used as part of an intrusion alarm system or other monitored instrumentation or building management system. The product can be used in a diverse range of applications which include, but are not limited to, securing rooms by monitoring door or lock latch or bolt position.
It incorporates a plunger microswitch that, when coming into contact with a lock, can alert a central monitoring station that the lock mechanism has engaged. For added security it houses a tamper switch that activates when the side cover is removed preventing unauthorised access to the end of line module.
Key Features:
- Ease of installation
- Removable side cover for easy access to EOLM (End of Line Module)
- 4mm thick Faceplate for strength and durability
-
CB 5004 Crank Bolt
A Crank bolt goes over the AMS Secure Under Door Seal and into the floor. Works with other types of seals as well!
Goes over the AMS Secure Under Door Seal and into the floor to secure.
Works in conjunction with doors and door frames with off set requirements causes by acoustic and under door seals.
Alleviates the need for packers with ADI-5004 door bolt- Crank bolt ques over/under door seal and into the floor
- SCEC requirements
-
AMS CT20 – Cable Transfer (20mm diameter)
A safe transfer solution for all cables within a system around doors
The AMS CT20 cable transfer offers flexibility with a 20mm internal dimension spring. This allows additional cables to be pulled through the spring in applications that require multiple cables.
Spring retracts into casing when door is closed.
Features
- 20mm internal dimensions
- Able to take all cables
- Suitable for use with double doors
- Can be used with timber or aluminium doors
-
AMS DLBP – Double Blocker Plate
Ultimate peel resistant strength, most secure blocker plate available.
The AMS Australia Double Blocker Plate has been designed to work in conjunction with doors that have dual locks and the AMS Dual Lock Lever Handle (DLLH-33). It has two-way fixings for added strength and security.
Fitted with security screws through the door. Stud through door is tig-welded to stainless steel plate.
- Peel resistant
- Fixings provide ultimate strength & security
-
AMS 003 Secure Under Door Seal
The only secure under door seal, automatic secure drop down seal that prevents an under door attack.
This product is designed to seal the gap between the bottom of the door and the floor.
The Secure Under Door Seal is face fixed to the inside of the bottom of an outward opening door to eliminate a potential under door attack or the outside of an inward opening door (using secure fixings from the inside).When the door is opened the spring mechanism releases and allows the Secure Under Door Seal to retract into the security casing.
- Prevents under door attack
- No damage to floor underneath
- Stainless steel provides ultimate strength against attack
- 6mm stainless steel drop down plate
- Can be retro-fitted
-
AMS Self-Latching Lock Monitoring Box
The only product to overcome fire regulations and security requirements on a square bolt deadlock.
This lock monitoring product is the only one to overcome fire regulations and security requirements on a square bolt deadlock. It solves the issue of a door with a square bolt deadlock not latching if the square bolt dead lock is locked with the door in the open position.
The lock monitoring box comes supplied with one change over contact that can be used for multiple applications.
Standard security wiring applies depending on the installation system and requirements.- Fire regulations & Security requirements on a square bolt deadlock
- 4 hr fire rated
- Self-latching
-
AMS Dual Lock Lever
Designed and developed exclusively for single lever action to open dual lock doors
The Dual Lock Lever Handle Turn Snib has been designed and developed exclusively for single lever action to open dual lock doors, simultaneously with one action
This overcomes the existing problem of having to use a double handed action with dual locks to open a door.
The standard DLLH-33 has been enhanced to incorporate a turn snib (DLLH-33 T) which allows the top deadbolt to be activated internally via the turn snib. This does not affect the single downward action of the handle which will release both locks simultaneously.