Electric Accessories
Showing 109–126 of 138 results
-
FSH R40-12 Magnetic Door Holders Wall Mount 12VDC
Fire and smoke door, magnetic holder (hold back), titanium alloy surface finished, elegant appearance.
Installed on fire and smoke doors in projects where doors are required to be held in the open position for both pedestrian and general traffic, the devices have to be linked into a buildings fire/smoke alarm system. -
Trojan Surface Mounting Kit
For those areas where you cannot recess the unit into the wall.
This mounting Kit is for those areas where you cannot recess the unit into the wall. It comprises of a mounting block and deep surround to allow for the surface mounting of the Prox and Em Rex® units and gives you a neat and professional finish to a surface mounting situation. -
Trojan Vertical Double Surface Mount
The Vertical Double Surface Mount is used to enable the Prox Rex units to be surface mounted above the Em Rex units.
The Vertical Double Surface Mount is to allow for the surface mounting of the Prox Rex, Press Rex, Em Rex and Smart Em Rex Units
-
Trojan Vertical Double Flush Box
The Vertical Double Flush Box is used to enable the Prox Rex units to be flush mounted above the Em Rex units.
The Vertical Double Flush Box is used to enable the Trojan egress solution products to be mounted in a vertical format. It allows for the Press and Prox Rex units to be mounted above the Smart Em Rex and standard Em Rex units with the double vertical surround.
-
Trojan Monitored Em Rex Cover
Cover is used with the Em Rex Unit to deter unintended/malicious activation of the unit when it is installed in a public area.
Cover is used with the Em Rex Unit to deter unintended/malicious activation of the unit when it is installed in a public area.
The unit is passive and has no electronics that could fail and cause the unit not to operate.
-
Trojan Vertical Double Surround
This allows the Prox Rex unit and Em Rex unit to be mounted one above the other for a neat and tidy installation.
This allows the Prox Rex® / Press Rex® and Em Rex® / Smart Em Rex® to be mounted one above the other for a neat and tidy installation. The Em Rex / Smart Em Rex would be positioned below the Prox Rex / Press Rex for Emergency.
-
Trojan Em Rex®
Emergency door release unit, which can be used on its own or with the Prox-Rex units, for a total access controlled exit solution.
The Trojan Em Rex Emergency Exit Device is a passive device and has no electronics that could fail and cause the device not to operate. The unit is always in a loaded condition which is released when activated.
-
Trojan Press-Rex®
The Press Rex® (Press to Exit) Door Release has an illuminated silicone push button - 12/24V options
The Press Rex® (Press to Exit) has an illuminated silicone push button of a size that can be easily pressed and seen in areas of limited lighting.
It also operates on either 12Vdc or 24Vdc. -
AHS MLG-800SS Stainless Steel 800kg Gate Lock
AHS MLG 800kg Stainless Steel Gate Lock. Dual Fix, 12/24vdc, Magnetic Bond Sense (MBS) Only
AHS MLG-800 Stainless Steel Gate Lock
-
Trojan Prox-Rex®
The Trojan Prox Rex® Touch to Exit Switch is a resistive operated unit and has no part that could fail. It has a sensing range of up to 10mm.
The Trojan Prox Rex® Touch to Exit Switch is a resistive operated unit and has no part that could fail.
It has a sensing range of up to 10mm.
-
Lockwood 9/12 Wire Adaptor
Lockwood SP3782EL-251, 9 - 12 Pin Converter to Retrofit 3580 Narrow Mortise
The 9 pin adaptor allows a Selector Electric mortice lock to be retrofitted in place of an equivilent Synergy Electric mortice lock avoiding the need to change the cabling or recieving pin. However where a power to open (3582ELE) is installed it is recommended to re-wire the door to support a 3 wire control.
-
Lockwood 9/12 Wire Adaptor
Lockwood SP3570-5871 , 9 - 12 Pin Adaptor to convert 9 Pin 3570EL to 12 Newer Pin
Adaptor to convert old 9 pin cable to newer 12 pin
-
TRIMEC Glass Door Bracket for EM600 Z8 Series Mag Lock
TRIMEC 770600-905 EMGDB600 Glass Door Bracket for EM600 Z8 Maglock
These accessories allow the electromagnetic locks to be used in a number of different applications and can be adjusted and suited to each situation.
-
TRIMEC Adjustable L Bracket for EM600 Series Mag Lock
TRIMEC 770600-903 EMAAB600 Adjustable L Bracket for EM600 Z8 Maglock
These accessories allow the electromagnetic locks to be used in a number of different applications and can be adjusted and suited to each situation.
-
TRIMEC Z&L Double Bracket for EM600 Z8D Series Mag Lock
TRIMEC 770600-902 EMZL600 Z&L Bracket for EM600 Z8D Maglock
These accessories allow the electromagnetic locks to be used in a number of different applications and can be adjusted and suited to each situation.
-
TRIMEC Z&L Bracket for EM600 Z8 Series Mag Lock
TRIMEC 770600-901 EMZL600 Z&L Bracket for EM600 Z8 Maglock
These accessories allow the electromagnetic locks to be used in a number of different applications and can be adjusted and suited to each situation.
-
TRIMEC Weather Resistant Z8 EM600 Series Mag Lock
TRIMEC 770600-310 EM600MWR Weather Resistant Maglock
The Z8 weather Resistant Electromagnetic Lock (mag locks), operates with holding a force up to 580kg. Covering a range of applications this magnet is ideal for applications where it is exposed to the weather.
-
TRIMEC Glass Door Bracket for EM230 Z4 Series Mag Lock
TRIMEC 770300-905 EMGDB230 Glass Door Bracket for EM230 Z4 Maglock
The Trimec Electromagnetic Lock (mag locks) range offers a number of accessory options.