Close

Airteq 9624 Motorlock Right

Airteq 9624-09-R Institutional Motorlock Right Hand

15420109

The 9624 provides for electric or manual locking / unlocking of swinging doors. It can be operated from a remote location or by key at the door. For additional security, it is recommended that the 9624 lock be used with an Airteq high security door position sensor. An automatic door closer may also be used.

KEY CYLINDER:
Mogul cylinder or builders key cylinder with mogul sleeve
(sold separately)

Login to see prices

STANDARD OPERATION
 Latch bolt retracts when momentary signal is applied
to the lock and remains retracted for a specified interval,
at which time the latchbolt extends, locking the
door if closed, or allowing the door to be slam-locked
if open.
 Provides automatic deadlocking, even in the event of
a total loss of power.
 Accepts a mogul key cylinder to allow for manual mechanical
unlocking of the lock by key at the opening.
 Fail secure, unlocks when energized.
APPLICATION:
Swing door lock for entrances, safety vestibules, corridors,
inmate and and custodial housing, and suitable for exterior locations.
SECURITY LEVEL:
ASTM F 1577 Grade 2, Grade 1 optional
KEY CYLINDER:
Mogul cylinder or builders key cylinder with mogul sleeve
(sold separately).
MOUNTING:
Jamb mounted in 4” frame with either hinge side or stop
side access cover.
FIRE RATING:
UL10B – 3 Hour
(not available with these functions: KLHB,ELHB & RLHB)
STANDARD FEATURES
 Latch bolt has a full 7/8” throw
 Slam-locking with automatic mechanical deadlock
 Roller-type deadlock actuator
 Lock status switch indicates deadlocked latchbolt
 Keyed one or two sides
 Nickel plated Strike/Keeper furnished with tamper resistant
screws
 Security ring, supplied unfinished to HM manufacturer
for frame installation and prime painting
 Quick connect electrical connectors
 Factory wired field-side pigtail
 Bright zinc and stainless steel parts

Motorlock_9624_-_current_1

 Body: All steel construction
 Dimensions: 1 1/2” x 16” x 3”
 Latchbolt: High strength alloy steel, hardened to RC 60
 Latchbolt Throw: 7/8” – Flush when retracted
 Deadlock Actuator: Roller type, stainless steel
 Lock Status Switch: 5 amp rated, UL recognized
 Electrical Power Consumption: 36 watt max. at 24 VDC,
1.5 amps
 Motor: 2 phase, bi-polar, brushless linear actuator
 Operating Range: 24 VDC ± 2VDC
 Electrical Connector: Quick connector with color coded wiring
harness
 Latchbolt Shear Strength: 40,000 pounds
 Strike/Keeper: 5/8” hardened 1018 cold rolled steel, nickel
plated with tamper resistant screws
 UL10B: 3 hour fire rating (see fire rating exceptions on cover page)
 ASTM F 1577 Lock Function C200-P24

Optional Features
 KR – Knob Release: Latchbolt is retracted by knob release on one side of lock. Knob is always active. When ordering, specify hinge side (HS) or stop side (SS).
 GR1 – ASTM Grade 1 Rating: Meets ASTM F1577 Grade 1 impact standards
 KCE – Key Cylinder Extension: Recommended for locks keyed stop side or keyed two sides.
Optional Functions
 RLHB – Remote Latch Holdback: Latch bolt is retracted by push button at the control panel and remains retracted until button is pushed a second time (control feature).
 KS – Key Switch: Door is electrically unlocked by key operated switch at the lock. Can be disabled by the control system.
 LEK – Local Electric Key Switch: Provides for one key which operates lock electrically only, while higher level keys will operate it both mechanically and electrically. Includes
‘KS’ function plus a special function key cylinder.
 KLHB – Key operated Latch HoldBack: Latch is retracted locally by key and remains mechanically retracted until relocked by key.
 ELHB – Emergency Latch HoldBack: Latchbolt is retracted remotely and remains mechanically retracted until relocked at the door by key (includes KLHB feature).
 RLB – Remote Latch Back: Latchbolt is retracted remotely and remains retracted until door is opened approximately 2”. Door relocks when closed.

STANDARD OPERATION
 Latch bolt retracts when momentary signal is applied
to the lock and remains retracted for a specified interval,
at which time the latchbolt extends, locking the
door if closed, or allowing the door to be slam-locked
if open.
 Provides automatic deadlocking, even in the event of
a total loss of power.
 Accepts a mogul key cylinder to allow for manual mechanical
unlocking of the lock by key at the opening.
 Fail secure, unlocks when energized.
APPLICATION:
Swing door lock for entrances, safety vestibules, corridors,
inmate and and custodial housing, and suitable for exterior locations.
SECURITY LEVEL:
ASTM F 1577 Grade 2, Grade 1 optional
KEY CYLINDER:
Mogul cylinder or builders key cylinder with mogul sleeve
(sold separately).
MOUNTING:
Jamb mounted in 4” frame with either hinge side or stop
side access cover.
FIRE RATING:
UL10B – 3 Hour
(not available with these functions: KLHB,ELHB & RLHB)
STANDARD FEATURES
 Latch bolt has a full 7/8” throw
 Slam-locking with automatic mechanical deadlock
 Roller-type deadlock actuator
 Lock status switch indicates deadlocked latchbolt
 Keyed one or two sides
 Nickel plated Strike/Keeper furnished with tamper resistant
screws
 Security ring, supplied unfinished to HM manufacturer
for frame installation and prime painting
 Quick connect electrical connectors
 Factory wired field-side pigtail
 Bright zinc and stainless steel parts

Motorlock_9624_-_current_1

 Body: All steel construction
 Dimensions: 1 1/2” x 16” x 3”
 Latchbolt: High strength alloy steel, hardened to RC 60
 Latchbolt Throw: 7/8” – Flush when retracted
 Deadlock Actuator: Roller type, stainless steel
 Lock Status Switch: 5 amp rated, UL recognized
 Electrical Power Consumption: 36 watt max. at 24 VDC,
1.5 amps
 Motor: 2 phase, bi-polar, brushless linear actuator
 Operating Range: 24 VDC ± 2VDC
 Electrical Connector: Quick connector with color coded wiring
harness
 Latchbolt Shear Strength: 40,000 pounds
 Strike/Keeper: 5/8” hardened 1018 cold rolled steel, nickel
plated with tamper resistant screws
 UL10B: 3 hour fire rating (see fire rating exceptions on cover page)
 ASTM F 1577 Lock Function C200-P24

Optional Features
 KR – Knob Release: Latchbolt is retracted by knob release on one side of lock. Knob is always active. When ordering, specify hinge side (HS) or stop side (SS).
 GR1 – ASTM Grade 1 Rating: Meets ASTM F1577 Grade 1 impact standards
 KCE – Key Cylinder Extension: Recommended for locks keyed stop side or keyed two sides.
Optional Functions
 RLHB – Remote Latch Holdback: Latch bolt is retracted by push button at the control panel and remains retracted until button is pushed a second time (control feature).
 KS – Key Switch: Door is electrically unlocked by key operated switch at the lock. Can be disabled by the control system.
 LEK – Local Electric Key Switch: Provides for one key which operates lock electrically only, while higher level keys will operate it both mechanically and electrically. Includes
‘KS’ function plus a special function key cylinder.
 KLHB – Key operated Latch HoldBack: Latch is retracted locally by key and remains mechanically retracted until relocked by key.
 ELHB – Emergency Latch HoldBack: Latchbolt is retracted remotely and remains mechanically retracted until relocked at the door by key (includes KLHB feature).
 RLB – Remote Latch Back: Latchbolt is retracted remotely and remains retracted until door is opened approximately 2”. Door relocks when closed.