Close

Lockwood Selector® 3772 Universal Mortice Lock

3772 Universal Mortice Lock

The Lockwood Selector range is a comprehensive range of cylinder mortice locks suitable for heavy duty use in industrial and commercial buildings, institutions, clubs, schools, hospitals, hotels and similar buildings.
These locks have various latching functions which can be operated by key or handle outside and by turn knob, key or handle inside.

Its a quick and easy install with In-door Configuration!

Add to Quote
Add to Quote
  • Easy red/green function setting
  • All lock settings are made from under the faceplate allowing for simple in-door configuration
  • Standard primary locks include anti-lockout and holdback capabilities
  • Improved cylinder functions including lock/unlock and retract latch as standard
  • Through-fixing of rose furniture turn knobs and escutcheons
  • Reduced range of cylinder cams and turn adaptors relative to other commonly available commercial cylinder mortice locks
  • 60mm backset
  • Cylinder Retaining Pin Hard-drawn spring steel wire, corrosion protected
  • 32 to 50mm Door Thickness, components to facilitate use on thicker doors are available on application
  • Stainless Steel finish
  • Primary lock body only

 

Compatible with most Lockwood rose and plate furniture including Brass Door Furniture, Robert Watson Series, Artefact Series II, Ovation Series and VSR Series.

Lockwood Electric Mortice Locks Catalogue

Standards and Compliance

  • S3 (Security) Australian Lock Standard (AS4145.2.1993) (when used with equivalent security level keying system).
  • D3 (Durability) Australian Lock Standard (AS4145.2.1993).
  • Successfully fire rated up to 4hrs on fire door assemblies in accordance with AS1905.1. 2005 (Part 1: Fire resistant door sets).
  • C-Tick Certified.
  • 3570 Series: SCEC endorsed for intruder resistant areas.
  • 3579 Series: SCEC endorsed for secure areas.
  • Easy red/green function setting
  • All lock settings are made from under the faceplate allowing for simple in-door configuration
  • Standard primary locks include anti-lockout and holdback capabilities
  • Improved cylinder functions including lock/unlock and retract latch as standard
  • Through-fixing of rose furniture turn knobs and escutcheons
  • Reduced range of cylinder cams and turn adaptors relative to other commonly available commercial cylinder mortice locks
  • 60mm backset
  • Cylinder Retaining Pin Hard-drawn spring steel wire, corrosion protected
  • 32 to 50mm Door Thickness, components to facilitate use on thicker doors are available on application
  • Stainless Steel finish
  • Primary lock body only

 

Compatible with most Lockwood rose and plate furniture including Brass Door Furniture, Robert Watson Series, Artefact Series II, Ovation Series and VSR Series.

Lockwood Electric Mortice Locks Catalogue

Standards and Compliance

  • S3 (Security) Australian Lock Standard (AS4145.2.1993) (when used with equivalent security level keying system).
  • D3 (Durability) Australian Lock Standard (AS4145.2.1993).
  • Successfully fire rated up to 4hrs on fire door assemblies in accordance with AS1905.1. 2005 (Part 1: Fire resistant door sets).
  • C-Tick Certified.
  • 3570 Series: SCEC endorsed for intruder resistant areas.
  • 3579 Series: SCEC endorsed for secure areas.