Close

TRIMEC 770600-012 EM600MR Single Mag lock Z8 BLACK

Mag lock Z8 with Bond Sense and Reed

15373218

The Z8 Electromagnets are ideal for applications from standard doors through to high use commercial swing doors.

The EM600 Electromagnetic Locks (mag locks), operate with holding forces up to 580kg.

Key Features

  • Fail-safe: unlocks when power is removed
    Easy installation: suitable for both new and retrofit usage
    High holding force: refer to the technical data overleaf
    Self-alignment: armature plate pivots to accommodate door drop
    Silent operation: no humming or buzzing
    Dual voltage: site selectable 12 or 24 Vdc
    Monitoring: Reed Switch monitoring on all models. Hall-Effect monitoring onZ8 models.
    Instantaneous release: smart electronics on the Z Series Electromagnets eliminate residual magnetism
Login to see prices
SKU: 15373218 Categories: , , ,

Z8 Magnet

Holding Force: 550kg – 580kg
Dimensions: (L)266 x (H)72 x (D)40 mm
Voltage: 12Vdc/ 24Vdc ±10%
Current: 512mA @ (12Vdc) 256mA @ (24Vdc)
Monitoring: Hall-Effect/Bond sensing & Reed Switch
Operating Temperature: -10 to 55 Degrees
Operating Humidity: 0 – 95%

Specification Statement
Holding force is measured directly between armature and magnet, holding force on the door may vary depending on the leverage created. The Single Series Electromagnetic Lock should be constructed in an aluminium case with heavy duty electromagnet. The range only operates in fail safe mode and relies on a secondary lock or battery backup system. In some cases the magnet armature plate pivots to accommodate door drop. The lock needs to be equipped with inch smart electronicsinch that have zero residual magnetism, (instantaneous release). This is crucial for correct operation.

Standards and Compliance

  • Successfully fire rated up to 4hrs on fire door assemblies in accordance with AS1905.1. 2005 (Part 1: Fire resistant door sets)
  • CE Approved

C-Tick Certified

 

Z8 Magnet

Holding Force: 550kg – 580kg
Dimensions: (L)266 x (H)72 x (D)40 mm
Voltage: 12Vdc/ 24Vdc ±10%
Current: 512mA @ (12Vdc) 256mA @ (24Vdc)
Monitoring: Hall-Effect/Bond sensing & Reed Switch
Operating Temperature: -10 to 55 Degrees
Operating Humidity: 0 – 95%

Specification Statement
Holding force is measured directly between armature and magnet, holding force on the door may vary depending on the leverage created. The Single Series Electromagnetic Lock should be constructed in an aluminium case with heavy duty electromagnet. The range only operates in fail safe mode and relies on a secondary lock or battery backup system. In some cases the magnet armature plate pivots to accommodate door drop. The lock needs to be equipped with inch smart electronicsinch that have zero residual magnetism, (instantaneous release). This is crucial for correct operation.

Standards and Compliance

  • Successfully fire rated up to 4hrs on fire door assemblies in accordance with AS1905.1. 2005 (Part 1: Fire resistant door sets)
  • CE Approved

C-Tick Certified